Menu Close

Showing 1–16 of 19 results

  • Rated 0 out of 5

    The tank V=3m3 is designed for storing the coolant of the auxiliary brake and winch T XJ 100 and is a rigid rectangular structure

  • Rated 0 out of 5

    The tank on the wheelset is designed for storing process water. Technical characteristics and parameters Name of the working parameter, parameter characteristics Unit Value Length…

  • Rated 0 out of 5

    According to the standards API Spec. 5 CT, API Spec. 5B GOST 633-80, 632-80, 34380-2017 ST RK ISO 11960-2009, 13679-2016 GOST R 56175-2014, 52203-2004, 53366-2009,…

  • Rated 0 out of 5

    Technical characteristics and parameters Name of the working parameter Unit Value Length Width Height mm mm mm 11360 2600 2750

  • Rated 0 out of 5

    The circulation system is designed to operate with mud in the drilling rig and is preparing the drilling mud, a supply of drilling mud from…

  • Rated 0 out of 5

    The coil is used for passing and heating the oil and gas mixture to a certain temperature. The coil is heated by an intermediate heat…

  • Rated 0 out of 5

    According to the standard ST AO 970740000987-001-2020 The gas-filling anchor is attached to the lower coupling of the lock support of the plug-in pump using…

  • Rated 0 out of 5

    The rotor base is intended for installation of the drilling rotor, candles and is rigidly connected to the lifting platform on which the lifting unit…

  • Rated 0 out of 5

    The manifold unit is designed for tying pumping units with the wellhead during well cementing, hydraulic fracturing, and other flushing and sales operations.

  • Rated 0 out of 5

    Automated block gas furnace PP-0,63, PP-0,63 A (track heater) with water coolant is designed for heating dehydrated oil, oil emulsions and water in oil fields

  • Rated 0 out of 5

    According to the standard API 11AX The rod depth pump (rdp) is designed for lifting liquid from oil wells. According to the design, the pumps…

  • Rated 0 out of 5

    Heavy-duty semi-trailers are capable of carrying loads of considerable weight, which include almost any type of heavy machinery, oversized industrial equipment and apparatuses, metal structures,…

  • Rated 0 out of 5

    The receiving bridge is designed for placement and laying of drill pipes, pump-compressor pipes, and casing pipes. The receiving bridge for pipes is used in…

  • Rated 0 out of 5

    Tubing lining – is a protection on the inner wall of the pipe with a special antifriction and corrosion-resistant lining material EXPE. The surface of…

  • Rated 0 out of 5

    The lining, which uses a pipe with polyethylene EXPE Ø 73.025 mm (2 7/8″), Ø 88.9 mm (3½”) significantly extends the service life of pipes…

  • Rated 0 out of 5

    Hot water installations of water of UVN, VGU is applied to heating of the sea water used at washing of oil wells from paraffin. It…